Hi,Today we’re going explain how to repair microwave.to show you how to change the turntable drive coupling on your over the range microwave. It’s a really easy job; no tools required. Let me show you how we do it. Now to change the drive coupling on this microwave we’re first of all going to remove the turntable tray and the support ring; and check the support ring while you we have it apart here to make sure that the wheels are not cracked and they turn freely. Then just remove the old drive coupling and discard it. We’ll take our new drive coupling and we’ll line up that D-shaft with the motor underneath. Make sure it drops firmly into place. Clean the surface area where the support ring goes, set it back in place, and while we have the tray out check that for any signs of chipping or cracking; they’re made of tempered glass and are prone to breaking if they have a chip on them anywhere; and as well take caution when washing these, that you don’t put them in too hot of water or too cold of water. Let them climatize first. Reinstall the tray and make sure it turns freely, and our repair is complete. We told you it was an easy job.contact us
No comments:
Post a Comment