Thursday 20 June 2013

Lcd repair in Bangalore


Lcd repair in Bangalore:

 



LCD Replacement Maybe your roommate stepped on your MacBook. Or maybe you put  your backpackand threw it into the overhead bin of an airplane and somebody  squashed it. Regardless of how it happens, broken LCDs are such a bummer, and the  repair will usually cost you a couple hundred dollars. Some people might even go out and buy a whole new computer! Hi I’m mj with iFixit, and today I’m going to  show you how to replace the LCD on your MacBook yourself. It’ll save you a lot of  money, and it’s actually pretty fun. It’s possible to replace the LCD on any  MacBook, but today I’m specifically repairing an original plastic MacBook, and as  I do I’ll give you some tips on the trickier parts. Before you order your  replacement LCD, it’s important to know you’ve got the right part for the right  MacBook make sure you’ve got the right part for the right MacBook so check the  model number of your computer on our site first. What’s great about this repair lcd  is that you hardly need any tools to do it– I’ve got a coin, a plastic spudger,  a card that I don’t mind damaging, a Phillips 00 screwdriver from our 26 piece  bit driver kit, our replacement LCD of course and a screw tray which isn’t  totally necessary but it useful since there are a lot of screws and a lot of steps.readmore
Posted by at No comments:

TV repair in Bangalore

TV repair in Bangalore:


hi, now iam going to explain how to repair T.v. A lot of customers once they  dismantle their TV and remove the bulb; will have something looking similar to  this. This is out of the Sony TV, this one right here is out of a Mitsubishi DLP  TV. Most DLP bulbs are the bulb itself and then they are in the plastic housing  that is removable. Usually the bulbs are attached to the TV in one screw. When  you remove the bulb from the TV you wanna make sure when handling the bulb,  especially the new bulbs, that you’re wearing gloves that will prevent the oils  from your finger from coming into contact with the lens. This is to prevent any  heat spots from being created while the bulb is being used those heat sports can  cause the bulb prematurely burn or cause different issues with the optical  assembly in your TV. Proper handling: is you always wanna avoid contacting the  front of the lens. Most bulb housings don’t need to be replaced you just need to  replace the bulb inside with an original Osram or Phillips option. You also want  to make sure you have Camtronics . A lot of people have canned air. Canned air  alone isn’t good enough. There are a lot of different brands out there. We stick  with the 3M brand and that’s the best brand. It’s what our technicians use. It  doesn’t leave residue, it doesn’t cause short circuiting. You wanna follow the  instructions on the can. Visit our site
Posted by at No comments:

microwave repair in bangalore

Hi,Today we’re going explain how to repair microwave.to show you how to change  the turntable drive coupling on your over the range microwave. It’s a really easy  job; no tools required. Let me show you how we do it. Now to change the drive  coupling on this microwave we’re first of all going to remove the turntable tray  and the support ring; and check the support ring while you we have it apart here  to make sure that the wheels are not cracked and they turn freely. Then just  remove the old drive coupling and discard it. We’ll take our new drive coupling  and we’ll line up that D-shaft with the motor underneath. Make sure it drops  firmly into place. Clean the surface area where the support ring goes, set it  back in place, and while we have the tray out check that for any signs of  chipping or cracking; they’re made of tempered glass and are prone to breaking if  they have a chip on them anywhere; and as well take caution when washing these,  that you don’t put them in too hot of water or too cold of water. Let them  climatize first. Reinstall the tray and make sure it turns freely, and our repair  is complete. We told you it was an easy job.contact us
Posted by at No comments:

Refrigerator repair Bangalore

washing machine repair in bangalore:

Posted on 
Today we’re going expain how repair washinh machine. It’s a really easy job. All  we are going to need is a Phillips screw driver and a 5/16th nut driver. Let me  show you how we do it. Now before we begin this repair, the first thing we should  do is disconnect the power to the washer. Simple pull the plug from the  receptacle. Now the first step in this repair will be to remove the front panel.  There are two Phillips screws, about an inch in from either side just under that  lip. So either with a stubby Phillips screw driver or pull the machine forward  enough so that you can tilt it back and remove those two screws. Once we’ve  removed the two screws, we’ll pull the front panel out at the bottom and tilt it  down to disconnect the two spring clips at the top. Now we can set that aside.
Posted by at No comments:

Refrigerator repair Bangalore

Hai this is dail and search iam going to explain Fridge repair.Today we are going  to show you how to change the water inlet valve kit in your refrigerator. Pretty  easy job, you need a quarter inch nut driver and a sharp utility knife. Let me  show you how it’s done.your first step is to gain access to the interior of the  control housing next remove the thermostat control kno release the old thermostat  from the housing along with the temperature sensing tube taking note of their  position disconnect the wires you’re now ready to install the new temperature  control thermostat first straighten out the sensing tube and if applicable  transfer the insulator from the old sensing tube to the new one connect the wires  insert the new thermostat into place and conform the sensing tube to fit the  housing replace the thermostat knob reposition and secure the control  housing.you’re now ready to plug the appliance back in to make sure it’s  functioning properly.Readmore

Posted by at 2 comments:
Subscribe to: Posts (Atom)